LunarGlo® Waterproof Solar LED Fixture

LUNARGLO INSTALLATION INSTRUCTIONS AND WARRANTY

First and foremost, your LUNARGLO SOLAR LIGHT must have sunlight to perform properly.  The solar cell has the ability to completely charge the lithium-ion battery in as little as 9 hours, depending on how directly the unit faces the sun.  This battery, when fully charged, will give approximately 80 hours of continuous light. The internal controller will turn the system on at dusk and turn it off when the solar cell recognizes the first rays of the morning Sun.  The unit is self-contained and self-controlled so there are no switches to bother with.

When installing the units we suggest that you consider having units mounted level on the top of the portable restroom roof. Mounting the LUNARGLO SOLAR LIGHT is quite simple.  Using a 1-5/8” hole saw, simply drill through the roof of the portable toilet.  Remove the locking nut from the bottom of the light unit and insert the unit through the previously drilled hole.  Be sure that the O ring is fully seated prior to inserting the light unit on the roof.  From inside the portable, simply thread on the locking nut and tighten by hand until the unit is sealed to the roof and you are done!

SPECIAL NOTE: If your roof has ridges that extend UP from the surface of the roof, please use the template on the back side of these instructions as a guide to insure that the unit will properly seal to the roof surface.

If your LUNARGLO SOLAR LIGHT fails to work properly because of a defect in materials or workmanship, LUNARGLO will for a period of 24 months repair or replace the unit at our cost.  If your LUNARGLO SOLAR LIGHT fails due to abuse, we will replace or repair the unit for a fee based on the amount of damage done.  That fee will be determined after we have inspected the damaged unit at our facility. To return your unit for service or warranty work, notify us by phone or email and we will respond immediately.

Your LUNARGLO SOLAR LIGHT was charged when shipped.  Depending on how long the unit is in route, the controller may have shut the unit off.  As soon as you install this LUNARGLO SOLAR LIGHT, the charging system will begin storing power and your unit will function as designed.

Charging periods are greatly extended below 34 degrees and/or during late Fall through the Winter months when the angle of the Sun to the Earth is at its lowest.

Thank you for purchasing our LunarGlo product proudly manufactured here in the USA.

 

Contact us for special volume prices on 6 or more lights. Just click the Contact tab for our phone or email form. Thank you! 

Every LunarGlo light is built to order for optimum performance and reliability!  When you place your order, we finalize the assembly process by soldering the battery in place on the board, testing for functionality, mounting the board with its solar cell in the light body, then placing the protective dome over the solar cell and sealing it tight for waterproofing.  This up to 7 buisness day final assembly process ensures the highest level of performance and reliability of every LunarGlo light we ship.